Script MA-5600

Kalo yg ini script DSLAM Huawei MA-5600 ... lebih rumit :-)

Login:
Password:

MA5600>enable
MA5600#config
MA5600(config)#time 2008-06-11 11:00:00 ->tanggal & waktu setempat
MA5600(config)#auto-backup period configuration enable
MA5600(config)#auto-backup period configuration interval 1 time 01:00
MA5600(config)#auto-backup period data enable
MA5600(config)#auto-backup period data interval 1 time 00:00

Step precaution!
MA5600(config)#protect
MA5600(config-protect)#protect-group first 0/7/0 second 0/8/0 eth workmodeportstate
MA5600(config-protect)#quit
MA5600(config)#sysname huawei

Step 1 Set the IP address of the inband NMS port (GE port).
Create an NMS VLAN
huawei(config)#vlan 10 standard

Add the upstream port to the VLAN
huawei(config)#port vlan 10 0/7 0
huawei(config)#port vlan 10 0/7 1 // for subtend to frame 2Enter the VLAN interface mode
huawei(config)#interface vlanif 10

Set the IP address of the VLAN interface
huawei(config-if-vlanif10)#ip address [ip_equipment] 255.255.255.0
huawei(config-if-vlanif10)#quit

Step 2 Add a route.
huawei(config)#ip route-static 0.0.0.0 0.0.0.0 [ip_gateway]

Step 3 Set the SNMP parameters.
huawei(config)#snmp-agent sys-info version all
huawei(config)#snmp-agent community read public
huawei(config)#snmp-agent community write private

Step 4 Enable traps sending.
huawei(config)#snmp-agent trap enable standard

Step 5 Set the IP address of the target host for traps.
huawei(config)#snmp-agent target-host trap address [nms_server_ip] securityname private

Step 6 Set the IP address of the inband NMS as the source address for traps sending.
huawei(config)#snmp-agent trap source vlanif 10

Step 7 Save the data.
huawei(config)#save

Configure ADSL
Step 1 Registering ADEE board to MA5600 SCUB
huawei(config)#display board 0

if board still in “auto_find” state, please run command as below;
huawei(config)#board confirm 0

Step 2 Create smart VLAN for ADSL
huawei(config)#vlan 340 smart
huawei(config)#vlan 341 smart // for subtend to frame 2

Add the upstream port to the VLAN
huawei(config)#port vlan 340 0/7 0
huawei(config)#port vlan 341 0/7 0 // for subtend to frame 2
huawei(config)#port vlan 341 0/7 1 // for subtend to frame 2

Enter the VLAN interface mode


Step 3 Configuring the QoS
For Downstream
huawei(config)#traffic table index 7 ip car 384 priority 0 priority-policy tag-In-Package
For Upstream
huawei(config)#traffic table index 8 ip car 64 priority 0 priority-policy tag-In-Package
huawei(config)#display traffic table from-index 0

Step 4 Configuring the service port bundle from GE uplink to ADEE board
huawei(config)# multi-service-port vlan 340 port 0/0 0-63 vpi 0 vci 35 user-encap pppoe rx-cttr 7 tx-cttr 8 // For board slot 0
huawei(config)# multi-service-port vlan 340 port 0/1 0-63 vpi 0 vci 35 user-encap pppoe rx-cttr 7 tx-cttr 8 // For board slot 1
huawei(config)# multi-service-port vlan 340 port 0/2 0-63 vpi 0 vci 35 user-encap pppoe rx-cttr 7 tx-cttr 8 // For board slot 2

…..Ignore slot 7 & 8 (SCUB board)

huawei(config)# multi-service-port vlan 340 port 0/15 0-63 vpi 0 vci 35 user-encap pppoe rx-cttr 7 tx-cttr 8 // For board slot 15


Step 5 Configuring ADSL line profile for subscriber
huawei(config)#adsl line-profile add 10
Command:
adsl line-profile add 10
Start adding profile
Press 'Q' to quit the current configuration and new configuration will be neglected
>　Do you want to name the profile (y/n) [n]:
> Please choose default value type 0-adsl 1-adsl2+ (0~1) [0]:1
> Will you set basic configuration for modem? (y/n)[n]:y
Note: Setting to these mode of G992.3~5 will lead that the adsl ports that are not support adsl2+ not be activated
ADSL transmission mode:
> 0: All (G992.1~5,T1.413)
> 1: Full rate(G992.1/3/5 or T1.413)
> 2: g.lite(G992.2/4) (ADSL over ISDN board doesn't support g.lite mode)
> 3: T1.413(ADSL over ISDN board doesn't support T1.413 mode)
> 4: g.dmt (G992.1/3/5)
> 5: g.hs (G992.1~5, G992.5 is prior)
> 6: G992.1
> 7: G992.2
> 8: G992.3
> 9: G992.4
> 10:G992.5
> 11: ADSL all (G992.1~2,T1.413)
> 12: ADSL&ADSL2(G992.1/3 or T1.413)Please select (0~12) [0]:0
> Trellis mode 0-disable 1-enable (0~1) [1]:
> Downstream channel bit swap 0-disable 1-enable (0~1) [0]:
> Upstream channel bit swap 0-disable 1-enable (0~1) [0]:
> Please select channel mode 0-interleaved 1-fast (0~1) [0]:
> Will you set interleaved delay? (y/n)[n]:
>　Please select form of transmit rate adaptation in downstream:
> 0-fixed 1-adaptAtStartup 2-adaptAtRuntime (0~2) [1]:
> Will you set SNR margin for modem? (y/n)[n]:
> Will you set parameters for rate? (y/n)[n]:y
> Minimum transmit rate in downstream (32~32000 Kbps) [32]:32 ->bukan 64
> Maximum transmit rate in downstream (1024~32000 Kbps) [24544]:384
> Minimum transmit rate in upstream (32~6000 Kbps) [32]:32
> Maximum transmit rate in upstream (32~6000 Kbps) [1024]:64
Add profile 10 successfully

huawei(config)#interface adsl 0/0
huawei(config-if-adsl-0/0)#deactivate all
huawei(config-if-adsl-0/0)#activate all profile-index 10
huawei(config-if-adsl-0/0)#quit

huawei(config)#interface adsl 0/1
huawei(config-if-adsl-0/1)#deactivate all
huawei(config-if-adsl-0/1)#activate all profile-index 10
huawei(config-if-adsl-0/2)#quit

huawei(config)#interface adsl 0/2
huawei(config-if-adsl-0/2)#deactivate all
huawei(config-if-adsl-0/2)#activate all profile-index 10
huawei(config-if-adsl-0/2)#quit

…..

// ignore board 0/7 and 0/8; continue until board 0/15

huawei(config)#interface adsl 0/15
huawei(config-if-adsl-0/15)#deactivate all
huawei(config-if-adsl-0/15)#activate all profile-index 10
huawei(config-if-adsl-0/15)#quit

Step 7 Configuring PITP P-mode
huawei(config)# pitp enable pmode

Step 8 Saving configuration
huawei(config)#save

Script MA-5300

Script config DSLAM Huawei tipe MA-5300 :

Login:
Password:

MA5300>enable
MA5300#config terminal

Step precaution!
MA5300(config)#hostname huawei

Step 1 Set the IP address of the inband NMS port (GE port).
Create an NMS VLAN
huawei(config)#vlan 10 standard

Add the upstream port to the VLAN
huawei(config)#interface gigabitethernet 7/1/0
huawei(config-if-gigabitethernet7/1/0)#switchport mode trunk
huawei(config-if-gigabitethernet7/1/0)#switchport trunk allowed vlan 10
huawei(config-if-gigabitethernet7/1/0)#exit
huawei(config)#interface gigabitethernet 7/1/1 // for subtend to frame 2
Enter the VLAN interface mode
huawei(config-if-gigabitethernet7/1/1)#switchport mode trunk
huawei(config-if-gigabitethernet7/1/1)#switchport trunk allowed vlan 10
huawei(config-if-gigabitethernet7/1/1)#exit
huawei(config)#interface vlanif 10

Set the IP address of the VLAN interface
huawei(config-if-vlanif10)#ip address [ip_equipment] 255.255.255.0
huawei(config-if-vlanif10)#exit

Step 2 Add a route.
huawei(config)#ip route 0.0.0.0 0.0.0.0 [ip_gateway]

Step 3 Set the SNMP parameters.
huawei(config)#snmp-agent sys-info version all
huawei(config)#snmp-agent community read public
huawei(config)#snmp-agent community write private

Step 4 Enable traps sending.
huawei(config)#snmp-agent trap enable standard

Step 5 Set the IP address of the target host for traps.
huawei(config)#snmp-agent target-host trap address [nms_server_ip] securityname private

Step 6 Set the IP address of the inband NMS as the source address for traps sending.
huawei(config)#snmp-agent trap source vlanif 10

Step 7 Save the data.
huawei(config)#write

Configure ADSL
Step 1 Registering ADEE board to MA5600 SCUB
huawei(config)#show board 0

if board still in “auto_find” state, please run command as below;
huawei(config)#board confirm 0

Step 2 Create smart VLAN for ADSL
huawei(config)#vlan 340
huawei(config-vlan 340)#vlan-type smart
huawei(config-vlan 340)#exit
huawei(config)#vlan 341 // for subtend to frame 2
huawei(config-vlan 341)#vlan-type smart
huawei(config-vlan 341)#exit

Add the upstream port to the VLAN
huawei(config)#interface gigabitethernet 7/1/0
huawei(config-if-gigabitethernet7/1/0)#svlan-upport vlan 340
huawei(config-if-gigabitethernet7/1/0)#svlan-upport vlan 341 // for subtend to frame 2
huawei(config-if-gigabitethernet7/1/0)#exit
huawei(config)#interface gigabitethernet 7/1/1
huawei(config-if-gigabitethernet7/1/1)#svlan-downport vlan 341 // for subtend to frame 2
huawei(config-if-gigabitethernet7/1/1)#exit

Enter the VLAN interface mode


Step 4 Configuring the service port bundle from GE uplink to EADA or EADB board
huawei(config)# vlan 340
huawei(config-vlan340)#svlan-downport adsl0/0/0 to adsl15/0/47 // For board slot 0-15

Step 5 Configuring ADSL line profile for subscriber
huawei(config)#adsl line-profile add 10
Command:
adsl line-profile add 10
Start adding profile
Press 'Q' to quit the current configuration and new configuration will be neglected
>　Do you want to name the profile (y/n) [n]:
> Please choose default value type 0-adsl 1-adsl2+ (0~1) [0]:1
> Will you set basic configuration for modem? (y/n)[n]:y
Note: Setting to these mode of G992.3~5 will lead that the adsl ports that are not support adsl2+ not be activated
ADSL transmission mode:
> 0: All (G992.1~5,T1.413)
> 1: Full rate(G992.1/3/5 or T1.413)
> 2: g.lite(G992.2/4) (ADSL over ISDN board doesn't support g.lite mode)
> 3: T1.413(ADSL over ISDN board doesn't support T1.413 mode)
> 4: g.dmt (G992.1/3/5)
> 5: g.hs (G992.1~5, G992.5 is prior)
> 6: G992.1
> 7: G992.2
> 8: G992.3
> 9: G992.4
> 10:G992.5
> 11: ADSL all (G992.1~2,T1.413)
> 12: ADSL&ADSL2(G992.1/3 or T1.413)Please select (0~12) [0]:0
> Trellis mode 0-disable 1-enable (0~1) [1]:
> Downstream channel bit swap 0-disable 1-enable (0~1) [0]:
> Upstream channel bit swap 0-disable 1-enable (0~1) [0]:
> Please select channel mode 0-interleaved 1-fast (0~1) [0]:
> Will you set interleaved delay? (y/n)[n]:
>　Please select form of transmit rate adaptation in downstream:
> 0-fixed 1-adaptAtStartup 2-adaptAtRuntime (0~2) [1]:
> Will you set SNR margin for modem? (y/n)[n]:
> Will you set parameters for rate? (y/n)[n]:y
> Minimum transmit rate in downstream (32~32000 Kbps) [32]:32 ->bukan 64
> Maximum transmit rate in downstream (1024~32000 Kbps) [24544]:384
> Minimum transmit rate in upstream (32~6000 Kbps) [32]:32
> Maximum transmit rate in upstream (32~6000 Kbps) [1024]:64
Add profile 10 successfully

huawei(config)#adsl activate adsl0/0/0 to adsl6/0/47 10
huawei(config)#adsl activate adsl9/0/0 to adsl15/0/47 10

Step 7 Configuring PITP P-mode
huawei(config)# pitp pmode enable
huawei(config)# pitp pmode enable adsl0/0/0 to adsl15/0/47 pvc all

Step 8 Saving configuration
huawei(config)#write

Islam - The Empire Of Faith

Satu lagi film tentang sejarah Islam, blm selesai nontonnya ... mudah2an mencerahkan.

Bismillah

Ini salah satu clip yg gak sengaja dapat di youtube.
Insya Alloh mudah dihafalkan anak-anak :-)




Bismillah
by: Yusuf Islam

(Teacher): Now children, who knows what we should say before we start some new job or begin eating or go on a journey? Can anyone tell me?
(Children): Teacher! Teacher! Me! Me.... Bismillah!
(Teacher): Very good. Now what does it mean? Bismillah.
(Children): In the name of Allah!

I am a Muslim, the things I say
In everything I do everyday
We are Muslims, the things we say
In everything we do everyday

Oooh, Bismillah,
Oooh, Alhamdullillah (x2)

I am a Muslim and this I know
I need to eat so that I will grow
We are Muslims and this we know
We need to eat so that we will grow

When we eat we say Bismillah
When were full, we say Alhamdullillah (x2)

Water, juice and milk, these I think
Are so delicious for me to drink
Water, juice and milk, these we think
Are so delicious for us to drink

When we drink we say, Bismillah
When were done we say Alhamdullillah (x2)

Going out with my mum and dad
Coming home, oh what fun we had
Going out with our mum and dad
Coming home, oh what fun we had

Driving in the car, Bismillah
Coming safely home, Alhamdullillah (x2)

I go to sleep saying Allahs name
And in the morning I do the same
We go to sleep saying Allahs name
And in the morning we do the same

When we sleep we say Bismillah
When we rise we say Alhamdullillah (x2)

Repeat first verse

The Message of Islam

Lagi nyari vcd lama ar-risalah koq gak ketemu (tadinya pingin nonton bareng anak2) ... try to search at youtube, alhamdulillah ketemu juga ...

Ini trailer english version-nya:



Ini list clip film The Message (Ar Risalah):

The Message #1 The Message #2
The Message #3 The Message #4
The Message #5 The Message #6
The Message #7 The Message #8
The Message #9 The Message #10
The Message #11 The Message #12
The Message #13 The Message #14
The Message #15 The Message #16
The Message #17 The Message #18
The Message #19 The Message #20